Skip to content

Shipping across Canada and the USA

Precision cut PPFVerified before paymentBuilt for DIY

KitCutz
Check Fitment
Tesla · Pre-cut PPF

Tesla Model S Pre-cut Paint Protection Film Kits

Keep the finish on your Model S looking new with film cut for the car you actually own. Choose focused front-end coverage or an extended package, and we check the cut pattern before anything is cut.

  • Fitment checked before you pay
  • Ships across Canada and the USA
  • Replacement pieces at cost
Tesla Model S in a dark studio
Illustrative studio photo.

Check your Model S fitment

No payment now. We confirm the pattern and your price first.

Coverage

Choose your Model S coverage

Silver, Gold and Platinum, with the panels each one includes. Starting prices in Canadian dollars; your exact price comes with the fitment check.

Tesla Model S with the Gold (Full Front) film shown in yellow: full hood, front fenders, front bumper, headlights, mirror caps and door edges

Shown on a Model S for illustration. On a Model S the hood is long, so Gold’s full-hood piece avoids a film edge partway up.

Interactive coverage map

$699CAD starting price*

  • Full hood
  • Full front fenders
  • Front bumper
  • Headlight lenses
  • Side mirror caps
  • Door edge guards
Check Gold fitment ↗

Where a Model S takes the most damage

  1. 1Front fascia

    A low, wide bumper that takes the gravel kicked up on long highway drives.

  2. 2Long hood

    Chips spread further back on a long hood. A partial piece leaves a visible edge.

  3. 3Front fenders

    Grit from the front tires hits the fenders just behind the wheels.

  4. 4Mirror caps

    Stone hits at speed and scuffs in parking garages.

  5. 5Lower doors and rockers

    Winter spray and sand hit the low sides of the car.

*These are starting prices. Your exact price depends on your car’s year and trim, and we confirm it after the fitment check.

Custom pieces

Build a custom kit

Want just the hood, the bumper or a replacement piece? Pick what you need. We cut single pieces where we have a confirmed pattern for your Model S, and we confirm the price before you pay.

Pick the pieces you want

Damaged a piece during your install? Ask for it here too: replacement pieces are sold at cost under the Worry-Free DIY Policy.

Fitment guide

Which Model S do you have?

One pattern does not fit every year. Find your body below, then choose it in the fitment check.

    • 2012
    • 2013
    • 2014
    • 2015
    • 2016

    Original

    How to tell

    • Black, grille-like nose cone between the headlights
    • Earlier headlight design
    • 2016
    • 2017
    • 2018
    • 2019
    • 2020

    Facelift

    How to tell

    • Smooth, body-colored nose with no nose cone
    • Updated LED headlights
    • 2021
    • 2022
    • 2023
    • 2024
    • 2025
    • 2026

    Refreshed

    How to tell

    • Current look with black exterior trim instead of chrome
    • Yoke or round steering wheel inside
    • Plaid available from 2021
Trim and body check

2016 cars can be either the original or the facelift, so check the nose. If your Plaid or any car has different exterior parts, send a couple of photos with your request.

Installation

Installing on a Model S

Every kit ships with installation guidance. These are the things that matter most on this car.

  1. 1
    Plan for large panels

    The hood is big and curved at the front. Two people make it far easier to lift and position.

  2. 2
    Use plenty of slip solution

    More slip on large pieces gives you time to slide them into place before they tack down.

  3. 3
    Squeegee from the center out

    Push water toward the nearest edge in overlapping strokes, then go back over the edges.

  4. 4
    Know when to get help

    If the full hood or bumper feels like too much, start with the smaller pieces and get a hand for the big ones.

Why buyers trust KitCutz

Real feedback, clear terms

Feedback from verified buyers on our eBay store, word for word, with the product each one bought.

  • 8 milClear TPU film with a self-healing top coat
  • 10 yrFilm warranty; written terms come with your quote
  • Before you payA person checks your fitment and pattern
  • CA + USShipping across Canada and the USA

The PPF fits 100%. Great product quality.

s***vVerified eBay purchase · Tesla Model Y kit

Exceptional seller! This marked my maiden venture into installing PPF on my Tesla. Throughout the process, the seller was incredibly supportive, promptly answering even my most basic questions. The final result was quite satisfactory - despite a few minor bubbles, the overall quality of the film was impressive. I would unreservedly recommend them and look forward to future purchases. A+++.

r***9Verified eBay purchase · Tesla Model 3 kit

very nice communication, quality film, very good packaging, highly recommended

z***3Verified eBay purchase · PPF kit
Questions

Model S PPF questions

All questions
Does one PPF kit fit all Model S years?

No. The Model S has three main looks: the original with the nose cone (2012, 2013, 2014, 2015, 2016), the facelift (2016, 2017, 2018, 2019, 2020) and the refreshed car (2021, 2022, 2023, 2024, 2025, 2026). The front end differs between them, so we match your pattern to your car.

Is Model S Plaid fitment different?

It can be on some exterior parts. Tell us it is a Plaid and send a photo or two of the front and sides, and we confirm the pattern before you pay.

Can I get a full hood without a complete front kit?

Yes. Choose "Full hood" under "Build a custom kit" and send the request. We confirm the pattern and the price for your car.

Is full-body coverage worth it for a long-term owner?

It can be if you plan to keep the car for many years, drive gravel roads or park in tight spots. Most of the damage still happens up front, so many owners start with full front and add more later.

No payment at this stage

Ready to protect your Model S?

Tell us your year and trim. We check the right cut before you pay.